1. Pull out existing power outlet
(no-tice polarity) and cut-off wires or...

2. ...create new cut out.

3. Place MagCodePowerPort, with
or without fastener ring, in mounting
cut out and…

4. ...secure MagCodePowerPort with M28 fixing nut and …

...connect cables to vehicle harness (notice polarity) by soldering (5+6), crimping (7) or by using screw-type terminals (8).
Insert fuse - Ready!

   Download PDF

1. Cut-off existing plug - notice polarity .

2. Open MagCodePowerClip and select best fitting pull relief element for cable thickness (2a).

3. Cut grommet to size for thicker cables (3a), pass cable through pull relief element (3b) and apply
multicore wiring sleeves(3c).

4. Fix cable ends in screw terminals (notice polarity!) and place cable with
pull relief and grommet properly inside MagCodePowerClip.

5. Close housing with screw - Ready!