1. Pull out existing power outlet
(notice polarity) and cut-off wires...

...or 2. create new cut out.

3. Place MagCodePowerPort, with or without fastener ring, in mounting cut out.

4. Secure MagCodePowerPort with
M28 fixing nut.

5.+6. connect cables to vehicle harness (notice polarity) with quick-connect receptacles (6,3mm) or by soldering.
Insert fuse - Ready!

   Download PDF

1. Cut-off existing plug -
notice polarity.

2. Open MagCodePowerClip and
remove pull relief.

3. Cut grommet to size for thicker
cables (3a) and apply multicore
wiring sleeves (3b).

4. Fix cable ends in screw terminals
(4a)(notice polarity) and mount pull relief (4b) and grommet.

5. Close housing with screw - Ready!